Composition
Cement mixture with mineral fillers and organic modifiers.
Application
Master mortar mixture “Plaster “HEAT” for Blocks” is intended for preparing bases of cellular concrete blocks (foam concrete, aerated concrete) for finishing inside and outside buildings. Effective when repairing cracks, sinks, notches and other defects on the surfaces of bases. Layer thickness per application – from 3 to 30 mm.
Technical characteristics
| Dry mix consumption per 1 mm layer thickness | approx. 1.3 kg/m² |
| Mixture proportion per 15 kg of dry mix | 11.25–12 l water |
| Time of use of the mortar mix | ≥ 60 min |
| Temperature of use of the mortar mix | from +5 °C to +30 °C |
| Thermal conductivity | ≤ 0.3 W/m·K |
| Vapor permeability | ≥ 0.1 mg/mh Pa |
| Strength (after 28 days) in bending tension | ≥ 1.2 MPa |
| Strength (after 28 days) in compression | ≥ 2.5 MPa |
| Adhesion (bonding strength) | 0.3 MPa |
| Frost resistance not less | 50 cycles |
| Expiration date from date of manufacture | 12 months |
| Packaging | 15 kg bag |
Storage conditions
In the manufacturer’s proprietary sealed packaging on wooden pallets in dry rooms.
Reviews
There are no reviews yet.